Tuesday, 22 January 2019

Playing Around with Foil.......

I am so bad - I haven't even been here to wish you all a very happy new year. Put it down to the usual seasonal ailments and a hectic couple of weeks. Anyway, here I am.......and of course I wish you all a happy, healthy and peaceful new year

I thought I would share my thoughts on a new 'toy' - the
 Spellbinders Glimmer Hot Foil System, this post is the result of my very first efforts, literally snapping away as I went, so it's a honest commentary on my first impression. I didn't do a video, as there are so many professional ones out there that do a much better job than I could. There is a good one that explains the process HERE

The box contains everything you need to get started....the machine itself, a spacer plate and shim, some foil, and some accessories.....There is a rubber mat for your hot plates to cool down, and some nifty little magnetic tweezers to lift the hot plates off the machine. You get a couple of rolls of foil, and two foiling plates, a pretty floral wreath, and a Best Wishes sentiment






 To get started, simply switch on your machine,
wait for the platform light to glow green. Place
Your foiling plate onto the rubber platform face
up, switch on the timer and wait for it to stop 
flashing.........

 Now cut foil to size and place it (coloured side down) onto the hot plate. Cover with your card, the grid markings on the rubber surface make it easy to align your card. Place the shim and spacer plate on top. Now the whole of the heated platform can be pulled out of the docking station and taken over to your die cutting machine (I keep mine next to each other so the whole process is seamless)
 Run the heated sandwich slowly 
through your die cutter. I understand
that most die cutting machines are
compatible with the system (apart from the Cuttlebug) 
 When you take away the shims, this is what your cardstock will look like.....
 Now simply peel away the foil, and you are left with this gorgeous foiled and impressed image. It actually has the appearance of foiled letterpress, just beautiful
 Don't waste the left over foil - put a piece of waste card over the rubber surface, then the cardstock you want to foil. Place the waste foil (you can see where the LOVE word in the photo above has left a negative in the foil.) Cover this with a couple of sheets of card, then the normal shims, and run through your machine as before........
 This time, you will get a gorgeous foiled background, with the negative showing in the background colour. Because I was just experimenting, I didn't cut my foil straight, or placed the foil plate centrally, but if I had done this, I reckon this would look fabulous on black cardstock 
 Lastly, I tried foiling using just a regular wafer thin die, I need to play around a lot more with this, but it opens up a whole new world of foiling. The little band on the left is a Spellbinders die called Romantic Agenda. I found that sentiment dies worked well, but forgot to take a photo. I think, with time, I will be able to look at a die and assess pretty accurately how it will look when foiled
So there you have it....lots of brownie points from me for this system. Most importantly, it is well designed, lightweight, only has a small footprint so isn't going to take precious space on my desk, and it works! Just like it should, straight out of the box.......

The foils are inexpensive as well, and each roll has 15 feet of foil. You can use tiny scraps for small sentiments as well. 

I suppose the only downside as far as I can see is the cost of building up a library of foiling plates, but they don't cost any more than regular dies. I think that this initial cost is offset by the fact that you can foil using regular dies, and, let's face it, that cost comes with any new bit of kit we get......I think I bought every embossing folder on the market when I got my first little Cuttlebug! I'm sure, like everything else, as more and more foiling plates are released, there will be sales, and special deals appearing

So I hope this has given you an insight - I just wish you could come round for a coffee and we could explore the Glimmer a bit more together....xx 

4 comments:

  1. Happy New Year Enfys! This is a totally new technique that I haven't seen. Who know got foil would be the next new "thing" ? It is very eye catching. Thanks for sharing your new toy with us!!!

    ReplyDelete
  2. Thank you for sharing your experience with foiling. I'm still on the fence with buying a foiling platform or machine. Partly do to the expense and just how much I would really use the system, but you did make this look easy.

    ReplyDelete
  3. Happy New Year to you too Enfys ... it's wonderful to see a post on your blog again. I have truly missed you! I have been actively foiling since the first Minc came on the market, and I totally love it. However, I have to admit that actual foiled impression you have shown us is better than a Minc could do. there does not appear to be any flaws ... no bubbles, no crinkles, no flaking or spots missing. This truly dazzling. I am such a blingy kind of girl ... I love all types of glitter, sparkle, twinkle and shine, and this has got that for sure. Looks like I am going to have to look into it. Thanx for sharing your thoughts. Hugz, Carolxx

    ReplyDelete
  4. Lovely blog. Thanks for sharing with us.This is so useful.

    ReplyDelete

I love reading your comments, thank you for taking the time
Enfys x